Home > load-cells

load cells

Load cell: is a measured force load quantity converter, which covert the load acting upon them into an analogue or digital electronic signal. This measurement conversion makes use of a spring element which distorts under the influence of the load been measured and this distortion is detected and captured with the aid of a strain gauge.

Load Cells: are electronic weight sensors or transducers which purpose is to convert the weight applied to an electrical signal and transmit it to weight indicator or to the PC.

The load cell strain gauge: is an element , usually in the form of a looped electrical resistor in the shape of a strip, when incorporated into a transducer it is mounted on flexible backing material. When a load force , such a weigh load force, is exerted on the flexible backing material in contact with the load cell strain gauge; the resulting distortion of the backing material creates a proportional change in the electrical resistance of the strain gauge,. With the range of elasticity, the size of the mechanical distortion remains proportional to the applied mechanical force distortion into the load cells, so, the change of the resistance again in the load cell strain gauge is and electronic measurable proportion to the input load cell force quantity applied.

The loading of a load cell: refer  to the mass “m” that acts on the load cell in its measurement direction  (Load E(à 2)), as a dependent weigh load cell force taking into account the local acceleration due to gravity and its related variables.

Load cell types:  The load cell shape and size is determined by the type of the spring element use. The correct selection of the spring element and load cells mounting components depends among on the following factors as, the direction the load force is applied as compression or tension, the maximum load cell force capacity applied, as well  as the service load and the breaking load. The required measurement accuracy  and configuration requirements.

Load cell applications: Special attention must be paid to the load cells application on the points of the load cell; that is to said not only the the points of contact between a load cell and the load cell is intended to weigh, but also those between a load cell and its bearing surface. Load cells sensors should be use in the prescribed direction of loading only. The direction of loading is indicated by an arrow in many load cells. Lateral forces and bending torsional moments must be avoided as far as possible.

 

 

hardware and accessories
hardware and accessories
weighing_assemblies
weighing_assemblies
"s" type
"s" type
shear_beam
shear_beam
single_point
single_point
single ended beam
single ended beam
load compression
load compression
double ended beam
double ended beam
tension link
tension link
fluid damped
fluid damped
miniature cell
miniature cell

Products

alloy steel s-type load cell sentronik 7131 1t 2t 5t 10t 20t 30t 50t 75t 100t

Sentronik 7131 Alloy Steel Load Cell, for crane scale, tension measurement OIML NTEP IP67 protection.


Our Price: US$278.00
SkypeAsk a question about this product
alloy steel shear beam load cell sentronik 7143 100lb, 250lb

Sentronik 7143 Alloy Steel Shear Beam Load Cell. Compact, low capacity, high-precision. This load cell is small size and accuracy, makes it ideal for applications that demand high performance from a small package. This load cell is commonly used in platform scales, conveyer scales, and varied process weighing applications.

Interchangeable Products

  • RL 50210
  • Sensortronics 60040

Our Price: US$318.00
SkypeAsk a question about this product
alloy steel shear beam load cell sentronik 7147 7147 2,5K lb

Sentronik 7147 Alloy Steel Shear Beam load cells have a low profile design, and are made specifically for light to medium weighing applications such as floor scales. Their design makes them highly resistant to eccentric loads. Stainless steel construction offers strength and the ultimate in protection when caustic or corrosive environments are encountered. HMT models have M12 x 1/75 tapped through hole in load cavity.

Interchageable with

Cardinal LFB2500HMT-AS


Our Price: US$228.00
SkypeAsk a question about this product
alloy steel shear beam load cell sentronik 7148 5K lb

Sentronik 7148 Alloy Steel Shear Beam Load Cell for low profile floor and bench scales. Capacity 5K lb


Our Price: US$325.00
Market price: US$424.00 save 23%
SkypeAsk a question about this product
 
Scale market and balances Large warehouse inventory of load cells: From laboratory balances up to truck and hopper electronic digital scales.
Lakefront Business Center 7825 NW 29 Street #137 Miami, FL 33122 U.S.A.
Miami
Florida
U.S.A.
1-877-722-5308