Home > load-cells

load cells

Load cell: is a measured force load quantity converter, which covert the load acting upon them into an analogue or digital electronic signal. This measurement conversion makes use of a spring element which distorts under the influence of the load been measured and this distortion is detected and captured with the aid of a strain gauge.

Load Cells: are electronic weight sensors or transducers which purpose is to convert the weight applied to an electrical signal and transmit it to weight indicator or to the PC.

The load cell strain gauge: is an element , usually in the form of a looped electrical resistor in the shape of a strip, when incorporated into a transducer it is mounted on flexible backing material. When a load force , such a weigh load force, is exerted on the flexible backing material in contact with the load cell strain gauge; the resulting distortion of the backing material creates a proportional change in the electrical resistance of the strain gauge,. With the range of elasticity, the size of the mechanical distortion remains proportional to the applied mechanical force distortion into the load cells, so, the change of the resistance again in the load cell strain gauge is and electronic measurable proportion to the input load cell force quantity applied.

The loading of a load cell: refer  to the mass “m” that acts on the load cell in its measurement direction  (Load E(à 2)), as a dependent weigh load cell force taking into account the local acceleration due to gravity and its related variables.

Load cell types:  The load cell shape and size is determined by the type of the spring element use. The correct selection of the spring element and load cells mounting components depends among on the following factors as, the direction the load force is applied as compression or tension, the maximum load cell force capacity applied, as well  as the service load and the breaking load. The required measurement accuracy  and configuration requirements.

Load cell applications: Special attention must be paid to the load cells application on the points of the load cell; that is to said not only the the points of contact between a load cell and the load cell is intended to weigh, but also those between a load cell and its bearing surface. Load cells sensors should be use in the prescribed direction of loading only. The direction of loading is indicated by an arrow in many load cells. Lateral forces and bending torsional moments must be avoided as far as possible.

 

 

hardware and accessories
hardware and accessories
weighing_assemblies
weighing_assemblies
"s" type
"s" type
shear_beam
shear_beam
single_point
single_point
single ended beam
single ended beam
load compression
load compression
double ended beam
double ended beam
tension link
tension link
fluid damped
fluid damped
miniature cell
miniature cell

Products

tedea-1260s-single-point-aluminum-load-cell (75 to 635kg)

This single-point, off-center loading, aluminum load cell is designed for high-capacity applications and harsh environments.


Our Price: US$308.00
Market price: US$325.00 save 5%
SkypeAsk a question about this product
tedea-1263-single-point-aluminum-load-cell (100 to 300kg)

High Capacity Single Point Load Cells Tedea-Huntleigh Model 1263 is designed for direct mounting of large weigh platforms. The rugged construction offers high immunity to side forces making the High Capacity Single Point Load Cells Tedea-Huntleigh Model 1263 suitable for a wide range of weighing applications, including bench scales, check weighing and process weighing. A special humidity resistant  protective coating assures long term stability over the entire compensated temperature range. High Capacity Single Point Load Cells Tedea-Huntleigh Model 1263 provides scale manufacturers with a high accuracy, low cost sensor to meet today's needs.


Our Price: US$252.00
SkypeAsk a question about this product
tedea-1320-single-point- aluminum-load-cell (1000 to 2000kg)

Model 1320 is a high-capacity single-point load cell. Direct mounting of low-profile platforms simplifies the construction of floor scales, weigh bars, hanging scales and other types of weighing devices. Individually adjusted to eliminate corner errors. Capacities from 1000 to 2000 kg (2204.6 to 4409.2 lb).


Our Price: US$498.00
Market price: US$525.00 save 5%
SkypeAsk a question about this product
tedea-1510-single-point-stainless-steel-load-cell (100kg, 250kg, 500kg)

The 1510 is a stainless steel welded-seal cell ideally suited for washdown applications. Capacities from 100 kg to 500 kg.


Our Price: US$795.00
Market price: US$819.00 save 3%
SkypeAsk a question about this product
 
Scale market and balances Large warehouse inventory of load cells: From laboratory balances up to truck and hopper electronic digital scales.
Lakefront Business Center 7825 NW 29 Street #137 Miami, FL 33122 U.S.A.
Miami
Florida
U.S.A.
1-877-722-5308