Home > load-cells

load cells

Load cell: is a measured force load quantity converter, which covert the load acting upon them into an analogue or digital electronic signal. This measurement conversion makes use of a spring element which distorts under the influence of the load been measured and this distortion is detected and captured with the aid of a strain gauge.

Load Cells: are electronic weight sensors or transducers which purpose is to convert the weight applied to an electrical signal and transmit it to weight indicator or to the PC.

The load cell strain gauge: is an element , usually in the form of a looped electrical resistor in the shape of a strip, when incorporated into a transducer it is mounted on flexible backing material. When a load force , such a weigh load force, is exerted on the flexible backing material in contact with the load cell strain gauge; the resulting distortion of the backing material creates a proportional change in the electrical resistance of the strain gauge,. With the range of elasticity, the size of the mechanical distortion remains proportional to the applied mechanical force distortion into the load cells, so, the change of the resistance again in the load cell strain gauge is and electronic measurable proportion to the input load cell force quantity applied.

The loading of a load cell: refer  to the mass “m” that acts on the load cell in its measurement direction  (Load E(à 2)), as a dependent weigh load cell force taking into account the local acceleration due to gravity and its related variables.

Load cell types:  The load cell shape and size is determined by the type of the spring element use. The correct selection of the spring element and load cells mounting components depends among on the following factors as, the direction the load force is applied as compression or tension, the maximum load cell force capacity applied, as well  as the service load and the breaking load. The required measurement accuracy  and configuration requirements.

Load cell applications: Special attention must be paid to the load cells application on the points of the load cell; that is to said not only the the points of contact between a load cell and the load cell is intended to weigh, but also those between a load cell and its bearing surface. Load cells sensors should be use in the prescribed direction of loading only. The direction of loading is indicated by an arrow in many load cells. Lateral forces and bending torsional moments must be avoided as far as possible.

 

 

hardware and accessories
hardware and accessories
weighing_assemblies
weighing_assemblies
"s" type
"s" type
shear_beam
shear_beam
single_point
single_point
single ended beam
single ended beam
load compression
load compression
double ended beam
double ended beam
tension link
tension link
fluid damped
fluid damped
miniature cell
miniature cell

Products

digital-load-cell-simulator-sentronik-se-8201

SE8201 Digital load cell simulator has these advantages, such as Handed framework, Liquid crystal display and rechargeable cell supplying, Convenient Weight conversion, Good distinguish ability and High accuracy. PA8201 Digital load cell simulator is a good helper of checking, mending and calibrating electronic scales and weight instruments because it can accurately simulate the output signal of load cells via number adjust.


SkypeAsk a question about this product
fairbanks 420 series load cell transmitter with 4-20ma output

Fairbanks’ Load Cell Transmitter is ideal for customers who have tank or other types of scales but only require a 4-20 ma output. Common in many process control applications, the Load Cell Transmitter is also reffered to as a blind transmitter because there is no visual display, this device provides a very simple, low-cost alternative to installing an entire instrument on any scale where the only need is a 4-20 ma signal. Factory Mutual approval pending.


SkypeAsk a question about this product
fairbanks 5050 series single-cell tension mount assemblies (225lb to 1125lb)

• 5050 Series - A stainless steel, hermetically sealed, light capacity, tension load cell and mounting assembly.
• Features - Clevis type mount, dual electrical isolation, self-aligning, light capacities (225# - 1125#), “true” hermetic stainless steel load cells and FM approved.
 


Contact Us For Price


Call 1-877-722-5308 Miami, FL. SkypeAsk a question about this product
fairbanks 5060 series single-cell tension mount assemblies (2.25klb to 11.25klb)

• 5060 Series - A stainless steel, hermetically sealed, medium capacity, tension load cell and mounting assembly.
• Features - Clevis type mount, dual electrical isolation, self-aligning, medium capacities (2.25K - 11.25K), “true” hermetic stainless steel load cells and FM approved.
 


Contact Us For Price


Call 1-877-722-5308 Miami, FL. SkypeAsk a question about this product
 
Scale market and balances Large warehouse inventory of load cells: From laboratory balances up to truck and hopper electronic digital scales.
Lakefront Business Center 7825 NW 29 Street #137 Miami, FL 33122 U.S.A.
Miami
Florida
U.S.A.
1-877-722-5308