Home > more brands > sentronik scales > load-cells-sentronik

load cells sentronik

SENTRONIK LOAD CELLS: These devices are electronic weight sensors or transducers which purpose is to convert the weight applied to an electrical signal and transmit it to a weight indicator or to the PC.

Weighing load cell sensors: we manufacture all types af load cells, in aluminum, steel or stainless steel, analog and digital, shear beam load cell, single point load cell, canister load cell, double ended compression and s tension type

Weighing applications: Main load cells applications are in weigh scales and balances construction, hoppers, weigh tanks and silos. The heavy duty load cells are use in truck scales and railroad scales.

Load cell: is a measured force load quantity converter, which covert the load acting upon them into an analogue or digital electronic signal. This measurement conversion makes use of a spring element which distorts under the influence of the load been measured and this distortion is detected and captured with the aid of a strain gauge.

Load Cells: are electronic weight sensors or transducers which purpose is to convert the weight applied to an electrical signal and transmit it to weight indicator or to the PC.

The load cell strain gauge: is an element , usually in the form of a looped electrical resistor in the shape of a strip, when incorporated into a transducer it is mounted on flexible backing material. When a load force , such a weigh load force, is exerted on the flexible backing material in contact with the load cell strain gauge; the resulting distortion of the backing material creates a proportional change in the electrical resistance of the strain gauge,. With the range of elasticity, the size of the mechanical distortion remains proportional to the applied mechanical force distortion into the load cells, so, the change of the resistance again in the load cell strain gauge is and electronic measurable proportion to the input load cell force quantity applied.

The loading of a load cell: refer  to the mass “m” that acts on the load cell in its measurement direction  (Load E(à 2)), as a dependent weigh load cell force taking into account the local acceleration due to gravity and its related variables.

Load cell types:  The load cell shape and size is determined by the type of the spring element use. The correct selection of the spring element and load cells mounting components depends among on the following factors as, the direction the load force is applied as compression or tension, the maximum load cell force capacity applied, as well  as the service load and the breaking load. The required measurement accuracy  and configuration requirements.

Load cell applications: Special attention must be paid to the load cells application on the points of the load cell; that is to said not only the the points of contact between a load cell and the load cell is intended to weigh, but also those between a load cell and its bearing surface. Load cells sensors should be use in the prescribed direction of loading only. The direction of loading is indicated by an arrow in many load cells. Lateral forces and bending torsional moments must be avoided as far as possible.

 

 

s-beam-load-cell-sentronik
s-beam-load-cell-sentronik
load-sensor-shear-beam-sentronik
load-sensor-shear-beam-sentronik
weigh-sensor-double-ended-beam-sentronik
weigh-sensor-double-ended-beam-sentronik
weight-sensors-single-point-sentronik
weight-sensors-single-point-sentronik
load-sensor-compression-canisters-sentronik
load-sensor-compression-canisters-sentronik
junction-boxes-sentronik
junction-boxes-sentronik

Products

Aluminum Planar Beam Load Cell Sentronik 7401 75kg

The Setronik 7401 is a very low profile planar beam load cell. Its design allows for an extremely low scale construction. Using 3 or 4 type load cells is an alternative to a single point load cell configuration with the additional benefit of a practical unlimited platform size.

  • Material: Aluminum
  • Capacity: 75kg
  • Enviromental protection: IP65

Our Price: US$110.00
SkypeAsk a question about this product
Aluminum Planar Beam Load Cell Sentronik 7402 100lb 200lb
The Sentronik 7402 is a very low profile planar beam load cell. Load cell installation is simplified by the winged mounting arms providing optimum load cell performance in all types of scale structures.

Our Price: US$130.00
SkypeAsk a question about this product
aluminum s-type load cell sentronik 7020 50kg 100kg 150kg 200kg 250kg

The Sentronik 7020 Aluminum S-Type Load Cell is perfect to any Tension/Compression application.


Our Price: US$118.00
SkypeAsk a question about this product
Aluminum Single Point Load Cell Sentronik 7253 30kg 60kg 100kg 150kg 200kg 300kg

Sentronik 7253 Aluminum Single Point Load Cell designed to be used as a single unit for bench scale and base scales. It is designed for low profile scales. This load cells counts with IP67 protection.

Interchangeable with

  • Mettler-Toledo MT1241
  • Anyload 108AA

Our Price: US$158.00
SkypeAsk a question about this product