Home > more brands > sentronik scales > load-cells-sentronik

load cells sentronik

SENTRONIK LOAD CELLS: These devices are electronic weight sensors or transducers which purpose is to convert the weight applied to an electrical signal and transmit it to a weight indicator or to the PC.

Weighing load cell sensors: we manufacture all types af load cells, in aluminum, steel or stainless steel, analog and digital, shear beam load cell, single point load cell, canister load cell, double ended compression and s tension type

Weighing applications: Main load cells applications are in weigh scales and balances construction, hoppers, weigh tanks and silos. The heavy duty load cells are use in truck scales and railroad scales.

Load cell: is a measured force load quantity converter, which covert the load acting upon them into an analogue or digital electronic signal. This measurement conversion makes use of a spring element which distorts under the influence of the load been measured and this distortion is detected and captured with the aid of a strain gauge.

Load Cells: are electronic weight sensors or transducers which purpose is to convert the weight applied to an electrical signal and transmit it to weight indicator or to the PC.

The load cell strain gauge: is an element , usually in the form of a looped electrical resistor in the shape of a strip, when incorporated into a transducer it is mounted on flexible backing material. When a load force , such a weigh load force, is exerted on the flexible backing material in contact with the load cell strain gauge; the resulting distortion of the backing material creates a proportional change in the electrical resistance of the strain gauge,. With the range of elasticity, the size of the mechanical distortion remains proportional to the applied mechanical force distortion into the load cells, so, the change of the resistance again in the load cell strain gauge is and electronic measurable proportion to the input load cell force quantity applied.

The loading of a load cell: refer  to the mass “m” that acts on the load cell in its measurement direction  (Load E(à 2)), as a dependent weigh load cell force taking into account the local acceleration due to gravity and its related variables.

Load cell types:  The load cell shape and size is determined by the type of the spring element use. The correct selection of the spring element and load cells mounting components depends among on the following factors as, the direction the load force is applied as compression or tension, the maximum load cell force capacity applied, as well  as the service load and the breaking load. The required measurement accuracy  and configuration requirements.

Load cell applications: Special attention must be paid to the load cells application on the points of the load cell; that is to said not only the the points of contact between a load cell and the load cell is intended to weigh, but also those between a load cell and its bearing surface. Load cells sensors should be use in the prescribed direction of loading only. The direction of loading is indicated by an arrow in many load cells. Lateral forces and bending torsional moments must be avoided as far as possible.

 

 

s-beam-load-cell-sentronik
s-beam-load-cell-sentronik
load-sensor-shear-beam-sentronik
load-sensor-shear-beam-sentronik
weigh-sensor-double-ended-beam-sentronik
weigh-sensor-double-ended-beam-sentronik
weight-sensors-single-point-sentronik
weight-sensors-single-point-sentronik
load-sensor-compression-canisters-sentronik
load-sensor-compression-canisters-sentronik
junction-boxes-sentronik
junction-boxes-sentronik

Products

Aluminum Single Point Load Cell Sentronik 7357 30kg, 60kg, 150kg

Sentronik 7357 Aluminum Single Point Load Cell for use with medium size platforms, single point compact load cells.

Special features:

● Complies with OIML R60 C3
● Off-center load compensated  
● Protection to IP66


Our Price: US$370.00
SkypeAsk a question about this product
stainless steel shear beam load cell sentronik 7745 500 lb 1,25K lb 2,5K lb 5K lb

* Hermetically sealed (IP68)
* Stainless steel
* Low overall height
* Meets EMC/ESD requirements according to EN 45 501
* Complies with OIML R60 regulations up to 3000 d for scales according to EN 45 501
* Available options: Explosion-proof versions according to ATEX95 (for HLCF1C3)


Our Price: US$370.00
SkypeAsk a question about this product
Stainless Steel Single Point Load Cell Sentronik 7538 7kg 10kg 15kg 30kg 60kg

Sentronik 7538 Stainless Steel Single Point Load Cell is moisture proof, low profile, resistant to shock loading. 2 mv/v, 0.01% nonlinearity, 350/350 ohms, 5 ft 4 cond cable. NTEP 92-099 S/M III 3,000 div. FM Approved.

Interchangeable with

  • Rice Lake RL1380
  • HBM PWS
  • Anyload 108TSLL

Our Price: US$374.00
SkypeAsk a question about this product
load-cells-self-restoring-rocker-pin-module-sentronik-bty-ma(10t to 60t)

Changing the BTY-M's loading method, to adapt to different user. For the related information please consult the other sensors manual.


Our Price: US$378.00
Market price: US$1436.00 save 74%
SkypeAsk a question about this product
 
Scale market and balances Large warehouse inventory of load cells: From laboratory balances up to truck and hopper electronic digital scales.
Lakefront Business Center 7825 NW 29 Street #137 Miami, FL 33122 U.S.A.
Miami
Florida
U.S.A.
1-877-722-5308