Home > more brands > sentronik scales > load-cells-sentronik

load cells sentronik

SENTRONIK LOAD CELLS: These devices are electronic weight sensors or transducers which purpose is to convert the weight applied to an electrical signal and transmit it to a weight indicator or to the PC.

Weighing load cell sensors: we manufacture all types af load cells, in aluminum, steel or stainless steel, analog and digital, shear beam load cell, single point load cell, canister load cell, double ended compression and s tension type

Weighing applications: Main load cells applications are in weigh scales and balances construction, hoppers, weigh tanks and silos. The heavy duty load cells are use in truck scales and railroad scales.

Load cell: is a measured force load quantity converter, which covert the load acting upon them into an analogue or digital electronic signal. This measurement conversion makes use of a spring element which distorts under the influence of the load been measured and this distortion is detected and captured with the aid of a strain gauge.

Load Cells: are electronic weight sensors or transducers which purpose is to convert the weight applied to an electrical signal and transmit it to weight indicator or to the PC.

The load cell strain gauge: is an element , usually in the form of a looped electrical resistor in the shape of a strip, when incorporated into a transducer it is mounted on flexible backing material. When a load force , such a weigh load force, is exerted on the flexible backing material in contact with the load cell strain gauge; the resulting distortion of the backing material creates a proportional change in the electrical resistance of the strain gauge,. With the range of elasticity, the size of the mechanical distortion remains proportional to the applied mechanical force distortion into the load cells, so, the change of the resistance again in the load cell strain gauge is and electronic measurable proportion to the input load cell force quantity applied.

The loading of a load cell: refer  to the mass “m” that acts on the load cell in its measurement direction  (Load E(à 2)), as a dependent weigh load cell force taking into account the local acceleration due to gravity and its related variables.

Load cell types:  The load cell shape and size is determined by the type of the spring element use. The correct selection of the spring element and load cells mounting components depends among on the following factors as, the direction the load force is applied as compression or tension, the maximum load cell force capacity applied, as well  as the service load and the breaking load. The required measurement accuracy  and configuration requirements.

Load cell applications: Special attention must be paid to the load cells application on the points of the load cell; that is to said not only the the points of contact between a load cell and the load cell is intended to weigh, but also those between a load cell and its bearing surface. Load cells sensors should be use in the prescribed direction of loading only. The direction of loading is indicated by an arrow in many load cells. Lateral forces and bending torsional moments must be avoided as far as possible.





stainless steel shear beam load cell sentronik 7745 500 lb 1,25K lb 2,5K lb 5K lb

* Hermetically sealed (IP68)
* Stainless steel
* Low overall height
* Meets EMC/ESD requirements according to EN 45 501
* Complies with OIML R60 regulations up to 3000 d for scales according to EN 45 501
* Available options: Explosion-proof versions according to ATEX95 (for HLCF1C3)

Our Price: US$370.00
SkypeAsk a question about this product
stainless steel s-type load cell sentronik 7110SS 25lb - 40K lb

Sentronik 7110SS Stainless Steel S-Type Load Cell

Interchangeable with

  • RL20000
  • RL20001
  • Revere 363
  • Sensortronics 60001
  • Celtron STC

Our Price: US$340.00
SkypeAsk a question about this product
stainless steel hermetically sealed shear beam load cell sentronik 7140WSS2 500lb - 40K lb

Sentronik 7140WSS2 Stainless Steel Hermetically Sealed Shear Beam Load Cell, is ideal to be used for Platform scale, Track scale, Process weighing, Hopper & tank weighing and Washdown or corrosive application.

Interchangeable with

  • Rice Lake RL 35082
  • Rice Lake RLHTO-kg
  • Sensortronics 65083S-kg
  • Tedea Huntleigh 3510-kg
In Scalemarket you will find a wide range of great quality load cells and accesories for them, so you can accomplish the correct and successful production for your company. This S-Beam load cell gives to you the appropiate product for your tension/compression application. Be free to navigate for the different categories and models and find the one to suit your weighing need.

Our Price: US$274.00
SkypeAsk a question about this product
Scale market and balances Large warehouse inventory of load cells: From laboratory balances up to truck and hopper electronic digital scales.
Lakefront Business Center 7825 NW 29 Street #137 Miami, FL 33122 U.S.A.