Construction: Stainless steel weight platter, die cast
aluminum base and loadbridge, aluminum handle
Remote Display: 6-digit backlit display housed in an extruded
enclosure with a 1.5" cable assembly with RJ45 connector.
Includes 6" magnetic strip.
Remote Display Enunciators:
Zero- Indicates the scale is at zero weight
Hold- Indicates the weight hold feature is active
AC Power- Indicates AC Power is connected to the scale
and charging the battery
Remote Display Controls:
Zero Key- Includes 2% Auto Zero tracking or manual push
button to reestablish zero reference. Turns the scale OFF,
when operated via battery.
Hold Key: Enables or disables weight hold feature.
Enters into backlit and weight hold setting confi guration.
Weight Hold Settings:
Single- Allows you to hold the parcel weight on the display
for one parcel
Auto- Allows you to hold the parcel weight on the display for
unlimited parcels
Sealed- Some states may not accept weight hold in NTEP
approved applications. The sealed mode disables the
weight feature.
Backlit Settings:
Auto- Back light turns off after 5 seconds of non use
On- Back light is always on
Off- Back light is always off
Battery Conservation:
Sleep- After 5 minutes of non-use the scale will enter into
sleep mode. Pressing the zero key will re-activate the scale.
Auto Shutdown- After 1 hour of non use the scale will
shutdown. Pressing the restart button will re-start the scale.
Restart Button: While in battery operation mode, the restart
button (located on the rear of the scale) turns on the scale
Hard Wired Battery Cable: Battery cable is hard wired to main
PCB, no external connections
Battery Life:
Stored, no use - 14 days
Back light Off - 40 hours
Back light On - 12 hours
Back light Auto - 24 hours
Re-charge time - 8 hours
Re-charge cycles - 400 minimum
RS-232 Interface: 9-pin using Standard NCI protocol
Field Calibration: Alternate span points, 10 or 50 lb, can
simplify fi eld calibration. Can be set up either in decimal
pound or kilogram.